Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
man:the_virtual_terminal [2010-01-21 23:44]
asciiphil Links to commands.
man:the_virtual_terminal [2021-02-19 20:06] (current)
asciiphil old revision restored (2010-01-22 13:56)
Line 1: Line 1:
 ===== The Virtual Terminal ===== ===== The Virtual Terminal =====
  
-Each window in a screen session emulates a VT100 terminal, with some extra +Each window in a ''screen'' session emulates a VT100 terminal, with some extra functions added.  The VT100 emulator is hardcoded; no other terminal types can be emulated.
-functions added.  The VT100 emulator is hardcoded; no other terminal types +
-can be emulated.+
  
-Usually screen tries to emulate as much of the VT100/ANSI standard as +Usually ''screen'' tries to emulate as much of the VT100/ANSI standard as possible. But if your terminal lacks certain capabilities, the emulation may not be complete.  In these cases ''screen'' has to tell the applications that some of the features are missing.  This is no problem on machines using termcap, because ''screen'' can use the $TERMCAP variable to customize the standard ''screen'' termcap.
-possible. But if your terminal lacks certain capabilities, the emulation +
-may not be complete.  In these cases screen has to tell the applications +
-that some of the features are missing.  This is no problem on machines +
-using termcap, because screen can use the $TERMCAP variable to customize +
-the standard screen termcap.+
  
-But if you do a ''rlogin'' on another machine or your machine supports only +But if you do a ''rlogin'' on another machine or your machine supports only terminfo this method fails.  Because of this, ''screen'' offers a way to deal with these cases.  Here is how it works:
-terminfo this method fails.  Because of this, screen offers a way to deal +
-with these cases.  Here is how it works:+
  
-When screen tries to figure out a terminal name for itself, it first looks +When ''screen'' tries to figure out a terminal name for itself, it first looks for an entry named "screen.//<term>//", where //<term>// is the contents of your $TERM variable.  If no such entry exists, ''screen'' tries "screen" (or "screen-w" if the terminal is wide (132 cols or more)).  If even this entry cannot be found, "vt100" is used as a substitute.
-for an entry named "screen.<term>", where <term> is the contents of your +
-$TERM variable.  If no such entry exists, screen tries "screen" (or +
-"screen-w" if the terminal is wide (132 cols or more)).  If even this +
-entry cannot be found, "vt100" is used as a substitute.+
  
-The idea is that if you have a terminal which doesn't support an important +The idea is that if you have a terminal which doesn't support an important feature (e.g. delete char or clear to EOS) you can build a new termcap/terminfo entry for ''screen'' (named "screen.//<dumbterm>//") in which this capability has been disabled.  If this entry is installed on your machines you are able to do a ''rlogin'' and still keep the correct termcap/terminfo entry.  The terminal name is put in the $TERM variable of all new windows.  ''screen'' also sets the $TERMCAP variable reflecting the capabilities of the virtual terminal emulated.  Notice that, however, on machines using the terminfo database this variable has no effect.  Furthermore, the variable $WINDOW is set to the window number of each window.
-feature (e.g. delete char or clear to EOS) you can build a new +
-termcap/terminfo entry for screen (named "screen.<dumbterm>") in which +
-this capability has been disabled.  If this entry is installed on your +
-machines you are able to do a rlogin and still keep the correct +
-termcap/terminfo entry.  The terminal name is put in the $TERM variable of +
-all new windows.  Screen also sets the $TERMCAP variable reflecting the +
-capabilities of the virtual terminal emulated.  Notice that, however, on +
-machines using the terminfo database this variable has no effect. +
-Furthermore, the variable $WINDOW is set to the window number of each +
-window.+
  
-The actual set of capabilities supported by the virtual terminal depends +The actual set of capabilities supported by the virtual terminal depends on the capabilities supported by the physical terminal.  If, for instance, the physical terminal does not support underscore mode, ''screen'' does not put the ''us'' and ''ue'' capabilities into the window's $TERMCAP variable, accordingly.  However, a minimum number of capabilities must be supported by a terminal in order to run ''screen''; namely scrolling, clear screen, and direct cursor addressing (in addition, ''screen'' does not run on hardcopy terminals or on terminals that overstrike).
-on the capabilities supported by the physical terminal.  If, for +
-instance, the physical terminal does not support underscore mode, screen +
-does not put the ''us'' and ''ue'' capabilities into the window's $TERMCAP +
-variable, accordingly.  However, a minimum number of capabilities must be +
-supported by a terminal in order to run screen; namely scrolling, clear +
-screen, and direct cursor addressing (in addition, screen does not run on +
-hardcopy terminals or on terminals that overstrike).+
  
-Also, you can customize the $TERMCAP value used by screen by using the +Also, you can customize the $TERMCAP value used by ''screen'' by using the "[[commands:termcap]]" .screenrc command, or by defining the variable $SCREENCAP prior to startup.  When the is latter defined, its value will be copied verbatim into each window's $TERMCAP variable.  This can either be the full terminal definition, or a filename where the terminal "screen" (and/or "screen-w") is defined.
-"[[commands:termcap]]" .screenrc command, or by defining the variable $SCREENCAP prior +
-to startup.  When the is latter defined, its value will be copied verbatim +
-into each window's $TERMCAP variable.  This can either be the full +
-terminal definition, or a filename where the terminal "screen" (and/or +
-"screen-w") is defined.+
  
-Note that screen honors the "[[commands:terminfo]]" .screenrc command if the system +Note that ''screen'' honors the "[[commands:terminfo]]" .screenrc command if the system uses the terminfo database rather than termcap.
-uses the terminfo database rather than termcap.+
  
-When the boolean 'G0' capability is present in the termcap entry for the +When the boolean 'G0' capability is present in the termcap entry for the terminal on which ''screen'' has been called, the terminal emulation of ''screen'' supports multiple character sets.  This allows an application to make use of, for instance, the VT100 graphics character set or national character sets.  The following control functions from ISO 2022 are supported: lock shift G0 (''SI''), lock shift G1 (''SO''), lock shift G2, lock shift G3, single shift G2, and single shift G3.  When a virtual terminal is created or reset, the ASCII character set is designated as G0 through G3.  When the ''G0'' capability is present, ''screen'' evaluates the capabilities ''S0'', ''E0'', and ''C0'' if present. ''S0'' is the sequence the terminal uses to enable and start the graphics character set rather than ''SI'' ''E0'' is the corresponding replacement for ''SO''. ''C0'' gives a character by character translation string that is used during semi-graphics mode. This string is built like the ''acsc'' terminfo capability.
-terminal on which screen has been called, the terminal emulation of screen +
-supports multiple character sets.  This allows an application to make use +
-of, for instance, the VT100 graphics character set or national character +
-sets.  The following control functions from ISO 2022 are supported: lock +
-shift G0 (''SI''), lock shift G1 (''SO''), lock shift G2, lock shift G3, +
-single shift G2, and single shift G3.  When a virtual terminal is created +
-or reset, the ASCII character set is designated as G0 through G3.  When +
-the ''G0'' capability is present, screen evaluates the capabilities +
-''S0'', ''E0'', and ''C0'' if present. ''S0'' is the sequence the terminal +
-uses to enable and start the graphics character set rather than ''SI''. +
-''E0'' is the corresponding replacement for ''SO''. ''C0'' gives a +
-character by character translation string that is used during +
-semi-graphics mode. This string is built like the ''acsc'' terminfo +
-capability.+
  
-When the ''po'' and ''pf'' capabilities are present in the terminal's +When the ''po'' and ''pf'' capabilities are present in the terminal's termcap entry, applications running in a ''screen'' window can send output to the printer port of the terminal.  This allows a user to have an application in one window sending output to a printer connected to the terminal, while all other windows are still active (the printer port is enabled and disabled again for each chunk of output).  As a side-effect, programs running in different windows can send output to the printer simultaneously.  Data sent to the printer is not displayed in the window. The info command displays a line starting 'PRIN' while the printer is active.
-termcap entry, applications running in a screen window can send output to +
-the printer port of the terminal.  This allows a user to have an +
-application in one window sending output to a printer connected to the +
-terminal, while all other windows are still active (the printer port is +
-enabled and disabled again for each chunk of output).  As a side-effect, +
-programs running in different windows can send output to the printer +
-simultaneously.  Data sent to the printer is not displayed in the window. +
-The info command displays a line starting 'PRIN' while the printer is +
-active.+
  
-Screen maintains a hardstatus line for every window.  If a window gets +''screen'' maintains a hardstatus line for every window.  If a window gets selected, the display's hardstatus will be updated to match the window's hardstatus line.  If the display has no hardstatus the line will be displayed as a standard ''screen'' message.  The hardstatus line can be changed with the ANSI Application Program Command (APC): ''ESC_//<string>//ESC\'' As a convenience for xterm users the sequence ''ESC]0..2;//<string>//^G'' is also accepted.
-selected, the display's hardstatus will be updated to match the window's +
-hardstatus line.  If the display has no hardstatus the line will be +
-displayed as a standard screen message.  The hardstatus line can be +
-changed with the ANSI Application Program Command (APC): +
-''ESC_//<string>//ESC\'' As a convenience for xterm users the sequence +
-''ESC]0..2;//<string>//^G'' is also accepted.+
  
-Some capabilities are only put into the $TERMCAP variable of the virtual +Some capabilities are only put into the $TERMCAP variable of the virtual terminal if they can be efficiently implemented by the physical terminal.  For instance, ''dl'' (delete line) is only put into the $TERMCAP variable if the terminal supports either delete line itself or scrolling regions.  Note that this may provoke confusion, when the session is reattached on a different terminal, as the value of $TERMCAP cannot be modified by parent processes.
-terminal if they can be efficiently implemented by the physical terminal. +
-For instance, ''dl'' (delete line) is only put into the $TERMCAP variable +
-if the terminal supports either delete line itself or scrolling regions. +
-Note that this may provoke confusion, when the session is reattached on a +
-different terminal, as the value of $TERMCAP cannot be modified by parent +
-processes.+
  
-The "alternate screen" capability is not enabled by default.  Set the +The "alternate screen" capability is not enabled by default.  Set the ''[[commands:altscreen]]'' .screenrc command to enable it.
-''[[commands:altscreen]]'' .screenrc command to enable it.+
  
-The following is a list of control sequences recognized by screen.  "(V)" +The following is a list of control sequences recognized by ''screen''.  "(V)" and "(A)" indicate VT100-specific and ANSI- or ISO-specific functions, respectively.
-and "(A)" indicate VT100-specific and ANSI- or ISO-specific functions, +
-respectively.+
  
  
Line 128: Line 54:
 | ''ESC _''                        ||| (A) | Application Program Command (Hardstatus) | | ''ESC _''                        ||| (A) | Application Program Command (Hardstatus) |
 | ''ESC ] 0 ; //string// %%^G%%''  ||| (A) | Operating System Command (Hardstatus, xterm title hack) | | ''ESC ] 0 ; //string// %%^G%%''  ||| (A) | Operating System Command (Hardstatus, xterm title hack) |
-| ''ESC ] 83 ; //cmd// %%^G%%''    ||| (A) | Execute screen command.  This only works if multi-user support is compiled into screen.  The pseudo-user ":window:" is used to check the access control list.  Use ''[[commands:aclchg]] :window: -rwx #?'' to create a user with no rights and allow only the needed commands. |+| ''ESC ] 83 ; //cmd// %%^G%%''    ||| (A) | Execute ''screen'' command.  This only works if multi-user support is compiled into ''screen''.  The pseudo-user ":window:" is used to check the access control list.  Use ''[[commands:aclchg]] :window: -rwx #?'' to create a user with no rights and allow only the needed commands. |
 | ''Control-N''                    ||| (A) | Lock Shift G1(SO) | | ''Control-N''                    ||| (A) | Lock Shift G1(SO) |
 | ''Control-O''                    ||| (A) | Lock Shift G0 (SI) | | ''Control-O''                    ||| (A) | Lock Shift G0 (SI) |

User Tools